Space Grade UHF antenna UHF-ANT-EU-VC
The UHF-ANT-EU-VC is a patch antenna fed through vertically mounted SMA connector, ready to be installed to onto a single face of 1U CubeSat satellite. The antenna is designed to work with circular polarization. The antenna is manufactured following ECSS guidelines and Certificate of Conformity is released within produced samples. The antenna has been characterized by TIM LAP Laboratory according to UNI 17025 standard. The antenna has 8 installation recesses with holes for allowing mounting by means of screws not exceeding the antenna thickness. The 3D models of the antenna can be provided on request. The antenna is delivered with Interface Control Document and Datasheet, together with the Certificate of Conformity.
Figure: UHF-ANT-EU-VC-RHCP antenna 3D model.
| Specifications | Value (nominal) | Unit |
| Center Frequency | 866.5 | MHz |
| BW (Retrurn Loss < -10 dB) | 16 | MHz |
| Return Loss wrt 50 Ohm | < -10 | dB |
| Realized Gain | 3.6 | dBi |
| HPBW | > 100 | deg |
| Axial Ratio (between 1980MHz – 2010MHz) | <3 | dB |
| Dimensions (excluding connector) | 100(W) X 100(L) X 5.1(T) | mm |
| Weight | < 135 | g |
Figure: specifcations for the UHF-ANT-EU antenna with circular polarization.
For any enquiry concerning pricing, lead time for delivery and any additional information contact us at info@ramesrl.it !
All information, specifications, images and 3D models are ownership of Radio Analog Micro Electronics srl, any third party re-printing or re-publishing is not allowed without Radio Analog Micro Electronics srl consent.